Thin turf
Lawns where soil shows between the grass plants are overseeded so new grass fills the gaps and weeds have less room.

RAH Solutions LLC repairs thin, damaged and bare lawns in Edgerton and nearby towns. The crew finds out why the turf failed, corrects the soil and grade, then overseeds. Estimates are free. The yard pictured is a “before”.
Last updated: October 2026
RAH Solutions LLC is a licensed and insured, family-owned landscaper based in Edgerton, Wisconsin. Started by Robert Harried in 2023, it serves Rock and Dane County homes and businesses.
Lawn restoration is the repair of an existing lawn that has gone thin, patchy or bare. RAH Solutions LLC assesses the yard, removes dead turf, improves or regrades the soil where needed and overseeds with cool-season grass. The best seeding window in southern Wisconsin is mid-August to mid-September.
Most calls for lawn restoration near me in Edgerton come after the owner has already tried a bag of seed and watched it fail. Seed thrown on hard, bare ground rarely takes. It needs loose soil to settle into, steady moisture and the right time of year. Restoration is the work that gives seed those conditions.
It also means dealing with whatever killed the grass. A low area that holds water, a slope that washes out, soil packed hard by construction traffic: if that is left alone, new grass ends up the same way as the old. Because RAH Solutions also does excavating and grading, the dirt work and the seeding are done by one crew.
Restoration is not always the right choice. A yard with almost no living grass, or one that has to be green soon, is often better served by sod installation. Robert will say so at the estimate if that is the case.
RAH Solutions LLC repairs turf problems that mowing and watering alone will not fix, from a few bare patches to a whole yard.
Lawns where soil shows between the grass plants are overseeded so new grass fills the gaps and weeds have less room.
Dead spots from pets, spills, shade or heavy foot traffic are cleared to soil, loosened, topped up where needed and seeded.
Hard, compacted or thin soil is loosened and improved with topsoil so roots have somewhere to go.
Ruts, low spots, settled trenches and rough slopes are filled and regraded to a smooth surface that can be mowed.
Yards torn up by equipment, utility work or a building project are cleaned up, graded and brought back to lawn.
Where runoff strips the soil or water stands, the grade is corrected first so the seed and the soil stay put.
The cause is usually in the soil or the site, not the grass. RAH Solutions LLC checks four things during the assessment before any seed is ordered.
Compacted soil is common on newer subdivision lots. Roots stay shallow and water runs off instead of soaking in, so the soil is opened up before seeding.
Local silt loams often sit over a heavier clay-rich subsoil. Water lingers in low areas and the turf thins, which calls for regrading.
A lawn needs about an inch of water a week in summer or it goes dormant. Most dormant lawns recover, but weak areas may not come back.
A thick mat of leaves left over winter smothers turf and encourages snow mold. Those areas show up matted and dead in spring.
RAH Solutions schedules overseeding for mid-August to mid-September whenever it can, the window UW–Madison Extension names as best for Wisconsin. The soil is still warm, the air is cooling, and weed pressure is lower than in spring.
Dormant seeding in late fall is the second option: seed goes down after growth has stopped and sprouts the following spring. Spring seeding is third best, because young grass then has to get through its first summer. If your lawn needs grading, that part can be done earlier in the year so the ground is ready when the window opens. Core aeration is also best in fall, or in spring, while the grass is actively growing.
RAH Solutions LLC follows four steps on every restoration, from a patch repair to a full yard.
Robert walks the yard, checks slope, drainage, soil and shade, and works out why the turf failed.
You get a written estimate that lists the soil work, grading and seeding planned, and the best time to do it.
Dead turf and debris are cleared, the soil is loosened or regraded where needed, and seed is spread over the prepared ground.
The site is cleaned up and Robert goes over watering and the first mow with you before leaving.
These RAH Solutions job photos show the same sloped backyard: first with dead turf, then graded smooth and ready for seed.


Describe the lawn on a call to (608) 501-5123 and Robert will set a time to look at it.
Mid-August to mid-September, according to UW–Madison Extension. The soil is warm, nights are cooler and weeds compete less. Dormant seeding in late fall is the second choice, and spring seeding is third. The aeration and overseeding guide has the full calendar.
Grading and soil work can be done whenever the ground is workable. Seeding in spring is possible but is the third-best window, and summer seeding needs steady watering. RAH Solutions will tell you whether to seed now or prepare now and seed in late summer.
If the grade is right and there is still a fair amount of grass, overseeding is usually enough. If the yard is mostly bare or needs to be green quickly, sod installation may fit better. The sod vs. seed guide compares the two.
Keep the seedbed moist until the grass is up and established, which means light, frequent watering at first and deeper, less frequent watering once it is growing. Seed that dries out after it sprouts dies, so plan for watering before the job is scheduled.
Common causes around Edgerton are compacted soil, slow drainage over a clay subsoil, heavy shade, summer drought, leaves left on the turf over winter, and construction damage. RAH Solutions looks for the cause before recommending seed.
Yes. Low spots, ruts and washed-out areas are filled and regraded before seeding. Larger grading and drainage work is handled as excavating, by the same company with its own equipment.
Tell RAH Solutions what the yard, lot or driveway needs. Robert looks at the property in person and sends a written estimate, with no pressure and no obligation.
or call (608) 501-5123